Quick Project Facts
- Locations: Karlskrona, Sweden
- Products: FreewayCAM, Carmen® FreeFlow ANPR software, Globessey Data Server (GDS)
- Key functionality: vehicle analysis based on ANPR, weight, and category
- Year of installation: 2019
At the Stena Line shipping port in Karlskrona, Sweden, there are a lot of goods coming through each day. A new project, called rePORT is being implemented to automate processes and make workflow smarter—in Stena Line’s vision there is a smart port system where freights are properly tracked and the personnel’s job is aided with smart technology.
Let’s Start With Some Maths
3 or 4 ferries leave every day from the Stena Line shipping port in Karlskrona. Each ferry can hold from 300 to 500 trucks—that adds up to 1,000–2,000 trucks every day. Registering and analyzing so many trucks implies huge resources—as we speak about several minutes per truck.
What if we could ease this process with smart technology—and do this in seconds?
A New Concept With Smart Technology
Stena Line’s new concept called rePORT makes this possible, using a perfect mix of smart technology:
- License plate recognition
- Laser-based categorization
- Weight measurement
- CCTV surveillance and a complete database to manage all these incoming data.
Read below and figure out why these all are necessary.
The Challenge
Managing 1,000+ trucks every day and optimizing weight and ferry load capacity requires the following process:
- Each truck has to be registered at Stena Line—in advance, so all vehicles are expected and capacity is optimized based on this preliminary data.
- When the trucks arrive at the port, the vehicles have to be verified and their carriage has to be cross-checked with the pre-registered data.
- If there is a match, the access is granted and the truck can enter the ferry on a given lane.
The Solution: Smart Technologies, Integrated
We talk about multiple technologies that work seamlessly integrated into one smart port system. As mentioned, each vehicle has to be identified and its carriage should be verified. Here is how it is implemented.
License Plate Recognition
A key pillar of this system is the tracking of vehicles’ license plates using Automatic Number Plate Recognition (ANPR, also known as LPR for License Plate Recognition) technology. Purpose-built ANPR/LPR cameras capture the license plates of each vehicle and transfer the images to the server where the OCR algorithm extracts the number plates and turns the image into digital data. This is how vehicles are identified and cross-checked with the pre-registered data.
Laser Categorization
Not only the license plates but the carriages are also identified—using high-precision laser beam technology. This laser scans the shipment from multiple angles, providing a volume analysis. This volume is cross-checked with the preliminary input to verify the data.
Weight Measurement
In addition to the carriage volume, the weight of each truck is also registered using a special weight-in-motion (WIM) system that is capable of measuring the weight even of a moving vehicle.
CCTV Surveillance
The cameras do not just capture license plates but with a secondary lens, general CCTV photos are captured for security surveillance purposes. This way, the port has records about what happened at the gates and later these records can be searched in case of any investigation.
Complete Data Gathering Solution
All these data inputs could not be managed without complete software that groups these inputs and creates event data packages. This is implemented by the revolutionary Globessey Data Server (GDS) which is a perfect middleware between the data collection points and the port IT system.
GDS is a fully scalable data middleware solution that can be configured both for access control systems and the full highway system of even a whole country (like it works for example in the Hungarian nation-wide toll control system – read the case study here).
Installation
One great advantage of such a system is the—surprisingly—short installation time. Two experts within three days completed the local setup: by the 2nd day the system was already working seamlessly they had the last day only for testing and fine-tuning calibration.
Secondly, as this is a system with a remote updating feature, there is no need to visit the site all the time when there is a system renewal, it is done within minutes (though we are happy to travel and see our clients any time!). The same feature lets the user always be aware of the health status of each endpoint – having up-to-date information about the system working properly.
The Benefits
- Multi-modal verification in a single step of all incoming goods
- Automated ferry load capacity planning
- Smooth entry access, reduced to a few seconds from several minutes
- Multiple technologies packaged in one solution, no need for further integration
Though this project is only in a proof of concept phase, the results are quite promising—expect further updates shortly.
